Paanjo Power Window Switch for Hyundai Eon Front Right Side/(10.2011-09.2019)
The power window switch in a Hyundai Eon for the front right side or driver's side operates the electric window mechanism. It allows the driver to control the opening and closing of the respective window without manually rotating a window handle. Here's an overview of how it works and how you can fit it into the car.
Working of Power Window Switch. The power window switch is connected to the car's electrical system and sends signals to a control unit that operates the window motor. When the driver presses the switch up or down, it completes a circuit, sending a signal to the control unit. The control unit receives this signal and activates the window motor, causing it to raise or lower the window. Many modern power window switches include safety features like auto-reverse, which stops the window from closing if it detects an obstruction, ensuring safety.
Fitting the Power Window Switch. To fit a power window switch into the Hyundai Eon for the front right side (driver's side), follow these general steps.
Ensure the car is turned off and the key is removed from the ignition. Remove any covers or trim pieces around the door panel that conceal the switch assembly. These panels are often secured with screws or clips. While not always necessary, for added safety, you might choose to disconnect the car battery before working on the electrical components.
Carefully detach the old power window switch from its housing. Disconnect the electrical connector by gently pressing the release tab and pulling the connector away from the switch.Connect the electrical connector to the new power window switch. Ensure it securely clicks into place. Insert the switch into the housing and secure it properly. Reconnect the car battery (if disconnected) and turn the ignition on.
Test the newly installed switch by raising and lowering the corresponding window to ensure proper functionality. Once confirmed that the new switch is functioning correctly, reassemble any trim pieces or covers that were removed earlier. If uncertain or uncomfortable with the process, seek assistance from a professional automotive technician to ensure proper installation and functionality.