MOES Dual Power Solar Wind Charge Controller 50A 5500W Automatic Transfer Switch. Beneficial to Solar or Wind System. On cloudy or windless days when your battery gets low, it will automatically switch to grid power, protect your battery.Works like an opposite direction UPS. The ATS controller will switch to grid power when batteries votagle are lower than cut off point, it will switch back to battery power when the batteries votagle are higher than recovery point. DC 12/24/48V, AC 100-120V 60HZ / 220-240V 50HZ auto distinguish. User can define the Cut-Off and Recovery Voltages. Recovery voltage must be higher than Cut-off voltage. Battery type: Suitable for Sealed, Gel, Lead-acid, Lithium battery and so on. As long as the voltage of your battery are within the voltage ranges in the followings. 9-17V at 12V system;18-30V at 24V system; 30-60V at 48V system. 5.5kw(110V) or 11KW(220v), Fast Transfer time:Inverter transfer to public power?
10ms, public power transfer to inverter? Suitable for Sealed, Gel, Lead-acid Lithium battery and so on. 9-17V at 12V system;18-30V at 24V system;30-60V at 48V system. Battery real-time voltage;working status of public power, inverter and battery. The controller needs to connect the battery, powered by the battery and get battery power data.
This dual power transfer controller ATS-11KW is used between an off-grid system and public power. The controller is separately connected with public power, inverter, battery and load. On the top of the controller, there is an on/off switch, please turn on the controller after ensuring all cables are well connected.
The ATS power transfer controller provides reliable operation of an inverter and AC utility power in one compact device. The ATS switches automatically between the AC utility power and the inverter, while protecting the inverter against external Voltages.
The ATS controller will switch to grid power when batteries are lower than the user define. Auto distinguish :DC 12/24/48V, AC 100-120V 60HZ / 220-240V 50HZ auto distinguish. Beneficial to solar and wind system. When cloudy or windless days and your battery get low, automatic switching to grid power, Take over your battery. BIG POWER :5.5kw(110V) or 11KW(220v).
Fast Transfer time :Inverter transfer to public power? 10ms, public power transfer to inverter? 16ms Please tie the ground wire together. In applications where there is a stand-alone solar or wind system with an available AC mains supply(utility power), one can choose to use the energy stored in the battery(IES) first and when the inverter disconnects due to a low voltage battery, the controller automatically transfers the loads to the mains(utility power). Adjustable Cut-Off and Recovery Voltages.
LV-SW: setting the switching voltage function. BAT-V: normal displaying battery voltage. HV-SW: setting the recovery voltage. 4.12V, 24V, or 48V: displaying after the system indentification. Low voltage setting switching voltage, c.
Low voltage recovery to set switching voltage. Right arrow: shows low voltage switch to mains status. Left arrow: shows the low pressure is restored to the inverter state.
LCD red no function control display, fixed display after power on. The battery icon is low battery status. Rated Power :5.5kw(110V) or 11KW(220v).Input Voltage :Auto distinguish:AC 100-120V or AC 220-240. Output Voltage :Auto distinguish:AC 100-120V or AC 220-240. Transfer time :Inverter transfer to public power? 10ms, Public power transfer to inverter? LCD display :Working status of Public power, inverter and battery. System voltage :Auto distinguish:12V or 24V or 48V.
Low Cut-down :Default 11V/22V/44V, adjustable. Low Recovery :Default 13.5V/27V/54V, adjustable. Battery type :Suitable for Sealed, Gel, Lead-acid Lithium battery and so on.
Application :Off-grid solar or wind system. If you are not satisfied with our products.
And address before returning the item back. We would try our best to help you solve the problem.
We will provide the service as best as we can?? Is what we are striving for.