APC Rack PDU AP8962 Switched 0U 20A, 120V 24x NEMA 5-20R, 3 Phase L21-20P
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding.
Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur.Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. 6 ft (1.83 m). Installation guide Rack Mounting brackets Serial configuration cable Safety guide. 70.51 in (179.1 cm).
2.17 in (5.5 cm). 1.73 in (4.4 cm). 15.37 lb(US) (6.97 kg). Number of power socket outlets. FCC Part 15 class A ICES-003 UL 60950-1.
Ambient Air Temperature for Operation. 23.140 °F (-5.60 °C). Ambient Air Temperature for Storage. 13.149 °F (-25.65 °C).0.50000 ft (0.00.15240.00 m). Unit Type of Package 1. Number of Units in Package 1. 78.98 in (200.6 cm). 4.26 in (10.83 cm).
6.48 in (16.47 cm). 20.94 lb(US) (9.5 kg).
2 years repair or replace.