4 Axis TB6600 Controller HB Nema08 4.17oz-in Motor 12V Power Supply For CNC Kit
4 Axis TB6600 Controller HB Nema08 4.17oz-in Motor 12V Power Supply For CNC Kit. 4 Axis TB6600 Standard Driver Board Kit for CNC DIY.
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit.
This is an Electronics Kit which includes. 4 Axis TB6600 Standard Driver Board.Is equipped with TB6600HG chip. Compared with TB6560AHQ chip, the max work voltage of TB6600HG is up to 50V, the output current is up to 5A. It is specially developed for all the 2 or 4 phase Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34 stepper motors which are with higher current.
It can be directly controlled by the PC via the Mach3, Mach4, EMC2, KCAM4, etc. Before powering on the board, please set the DIP Switches first. Matching Stepper Motors and Power Supply. Nema8, Nema11, Nema14, Nema16, Nema17. Manual motor control via the control panel; support tool-settings on X, Y, Z, Axis without the computer. Between the computer and the control panel.On the computer and the display panel, up to 3 axis (X, Y, Z, axis). Real-time tracking of the motor moving path. 1, 2, 4 (new mode), 8, 16. Adjustable microstep control for more accurate and smoother motor running. Automatic idle-current reduction, powerful anti-jamming capability.
5 types of input control on the manual control interface, to set. 4 types of output current adjustable. 0-10V PWM signal output port.
For speed adjustment and one relay control port. Mach4, Linux CNC (EMC2), KCAM4 CNC Software, etc. Suitable for 2 or 4 phase stepper motors with.
Aluminum & high intensity PVC Box Design. For better cooling effect and item protection. High torque, more smooth movement.
High efficiency, energy-saving, low noise, and low vibration. High start torque, low start current, and reliable performance.Simple 4 wires ensure easier wiring, installation, and maintenance. High efficiency, high reliability, low cost. Adjustable ±10% Output Voltage support. PWM control and regulation, ensure the steady and precise output voltage. Over-temperature protection: built-in a powerful fan for cooling.
100% full load burn-in test. Over current, over voltage, short circuit. Low output ripple and yawp. The products in the wiring diagram are for reference. Suitable for a variety of small-sized automation equipment and instruments.
For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc. For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc. Electrical Properties of TB6600 Driver Board (ambient temperature Tj = 25°C). Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output). SRA-12VDC-CL 20A 14VDC 20A 125VAC. Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34. 12V 10A Switching Power Supply. 110VAC/ 220VAC±20% (selected by switch).15.617.8V hiccup mode, auto-recovery. I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC. (May depart from other stock location).
Require that the item should be delivered within a certain time. It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
We will help you to track them. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed. All qualified return/replacement must be guided by us. We may not accept your return without communication in advance. By placing an order, you acknowledge that you have accepted the terms and conditions of sale.